Got a question about buying this product? Contact RWB Communications.

IC M510E

— Radio Control & Intercom via Your Smart Device
— Wide Viewing Angle Colour TFT LCD
— New Sleek Design
— Simplified Navigation Function
— Provides Clear, Loud Audio
— Interface BOX for NMEA 2000™ and Hailer
— AIS Target Call with MA-510TR
— Active Noise Cancelling

For more information about this product please contact your nearest dealer.


Class-D DSC VHF Marine Radio with WLAN Function


Integrated AIS Receiver*

With its integrated AIS receiver* or external NMEA sentence (third party AIS receiver, transponder), the IC-M510E can show realtime AIS vessel traffic information on the display. You can directly make an individual DSC call to selected AIS targets from the AIS screen.
* AIS receiver is not included depending on the transceiver version.


New Sleek Design

The IC-M510E is slim (depth: 53.6 mm) and easy to install in your boat. It’s all-new sleek design is suitable for either panel or trunnion mounting.


Wide Viewing Angle Colour TFT LCD

The colour TFT LCD provides nearly a 180-degree viewing angle. The wide display has high-resolution characters and function icons. The night mode screen ensures good readability in low light conditions.


Simplified Navigation Function

The Navigation function guides you to a specified waypoint or AIS target. You can assign up to 100 destinations as waypoints.


Provides Clear, Loud Audio

The IC-M510E’s internal speaker enhances the received audio. The waterproof speaker provides superior sound quality with a wide frequency range for powerful, clear audio.


Built-in 50 CTCSS and 104 DTCS Tones With Split Tone Function

The CTCSS and DTCS tones are built-in for quiet stand-by and repeater access. The split tone function allows you to set CTCSS/DTCS tones separately for repeater uplink and downlink on a per channel basis.


Interface BOX for NMEA 2000™ and Hailer

The optional CT-M500 wireless interface box provides NMEA 2000™ connectivity and Two-way Hailer/PA function. The CT-M500 and the radio can be connected through WLAN. This separate interface box option allows for flexibility in positioning the unit closer to the NMEA network connection point.


And More

• Active Noise Canceling
• NMEA 0183/HS connectivity, NMEA 2000™ (CT-M500 required)
• Integrated GNSS receiver (Selectable from either internal
receiver or use optional UX-241 GNSS antenna)
• IP68 advanced waterproofing (1 m depth of water for 60 minutes)
• Automatic Foghorn function (CT-M500 required)
• Voice Scrambler with optional UT-112A
• AquaQuake™ prevents audio degradation
from a water-logged speaker
• Supplied speaker-microphone,
HM-205RB can be connected to the rear panel
• External speaker connection
• Controlled with COMMANDMIC™ HM-195 or HM-229 series
• Supports 4-digit channels